Gamma 6004 STRINGING MACHINE 6 POINT SC MOUNTING (Issue Bedienungsanleitung PDF herunterladen (Seite 17)

TROUBLESHOOTING TIPS

CARE & CLEANING

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp

Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the

diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol

and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.

PROBLEM SOLUTION

String slips in clamps - Adjust gap between clamp jaws

- Clean clamp jaws

String slips in gripper - Adjust gripper jaw stop screw

- Clean gripper jaws

String clamp base slips on turntable - Clean bottom of clamp & top of turntable with

alcohol

- Adjust clamp base locking nut

String tension too tight or too loose - Check tension using a tension calibrator,

adjust machine calibration if necessary

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Gamma 6004 STRINGING MACHINE 6 POINT SC MOUNTING (Issue Bedienungsanleitung Seite 17